What our gallery hanging service includes
Our gallery hanging service covers more than putting frames on a wall. We help plan the arrangement, check the wall type, set the spacing and install each piece so the final display feels balanced. That includes framed artwork, photography, mirrors and mixed size collections in homes, reception areas, boardrooms, galleries and retail spaces.
We work with plastered walls, brick, concrete and drywall, and we choose fixing methods that suit the surface and the weight of the frame. For heavier pieces we use proper anchors and hanging wire rated for the load, rather than a one-size-fits-all approach. In humid areas such as Durban or coastal Cape Town, we also consider corrosion resistance and the effect of moisture on paper, mounts and backing boards.
- Space planning for single pieces or full wall layouts
- Height and sightline advice for living rooms, passages, foyers and exhibition walls
- Level fixing for straight lines and even spacing
- Secure hardware suited to frame weight and wall surface
- Protection for artwork during handling and installation
How we plan the layout before drilling any holes
Good hanging starts on the floor or on paper templates, not with a drill in hand. We first measure the wall area, the frame sizes and the viewing distance. Then we work out centre lines, spacing between frames and the overall visual weight of the display. This is useful for gallery walls in Sandton apartments, gallery corridors in Rosebank, or reception walls in Midrand where the display must look ordered from every angle.
For a multi piece arrangement, we usually allow between 50 mm and 100 mm between smaller frames, and 80 mm to 150 mm for medium and large works, depending on the style of the exhibition. The final spacing is adjusted to suit the room and the work itself, because a tight cluster can suit a small passage while a wider layout may work better in a larger room. We also check ceiling height, furniture placement and door swings so the pieces are not awkwardly positioned.
- Wall measurements and centre point marking
- Template layouts for grouped frames
- Height checks against furniture and room traffic
- Spacing recommendations based on frame size and style
Installation process from enquiry to final check
Once you send an enquiry through our contact page, we confirm the type of work, the wall surface and the number of pieces. If needed, we ask for photos and rough measurements so we can prepare the right fixings before the visit. For larger hanging jobs, especially in galleries or offices, we may suggest a site check first so there are no surprises on the day.
On installation day we mark out the wall, confirm the position with you, and then hang each piece carefully. After fitting, we step back and check the line, the balance and the relationship between the artworks. If a display has to be aligned to a plinth, sideboard or reception counter, we set the heights accordingly. Small adjustments are done on the spot, because a few millimetres can make a visible difference.
We handle most standard hanging jobs in a single visit, but larger installations may take longer if there are many pieces, special fixings or difficult wall conditions. We keep the process neat and practical, with minimal disturbance to the room.
Turnaround times and where we work
Turnaround depends on the size of the job and whether the pieces are already framed. Smaller hanging projects can often be booked within a few working days, while gallery walls and larger installations may need more lead time. If the job includes framing, repairs or reframing before installation, we coordinate the timeline so the final hanging is done only after everything is ready.
We provide gallery hanging support from our Parkhurst base across Johannesburg, Pretoria, Midrand, Sandton and Rosebank, and we also serve clients in Cape Town and Durban. For collection and delivery of framed pieces, timing is arranged around access times, building rules and security procedures, especially in office parks and apartment blocks where loading bays and lift bookings can affect the schedule.
- Small home installations: usually within a few working days
- Medium displays: booked after layout confirmation and prep
- Large gallery or corporate walls: planned in stages where needed
- Collection and delivery can be arranged when required
Pricing approach for hanging work
We quote according to the number of pieces, the wall type, the hardware needed and the complexity of the layout. A straight run of small frames is different from a mixed size gallery wall with mirrors, heavy frames and uneven surfaces. If ladders, specialty fixings or extra handling are needed, that is taken into account as well.
Our pricing is explained clearly before the work starts so you can see what is included. In many cases, the quote covers planning, installation, adjustment and a final check. If additional site visits are needed for larger exhibitions or if the layout changes after approval, we discuss that before proceeding. There are no surprises at the end, which matters when you are managing a home refresh or a time sensitive exhibition.
- Quoted per piece, per wall or per project, depending on scope
- Hardware and specialist fixings included where specified
- Extra time charged only when the wall condition or layout changes the job
- Suitable for homes, galleries, studios and commercial spaces
Care and maintenance after installation
Once a display is up, it should stay clean and level with only minor care. We recommend a quick visual check every few months, especially in high traffic areas or where the wall may shift with building movement. In coastal humidity or spaces with air conditioning, it is worth checking the backing and hanging wire once or twice a year. If you notice any movement, we can inspect and reset the pieces before any damage occurs.
For galleries and busy commercial settings, we suggest regular maintenance intervals when exhibitions change or when the wall is repurposed for new work. That might be every 3 to 6 months for rotating displays, or after major events and venue changes. If a frame is loose, a hook has moved or the wall has taken a knock, it is better to correct it early rather than wait. A small shift can quickly become obvious, and a damaged fixing can put the artwork at risk.
- Check level lines after cleaning or furniture moves
- Inspect heavy pieces every 6 to 12 months
- Review hanging hardware after exhibitions or events
- Book maintenance sooner in humid or high traffic areas
Why clients call Bright Frames for hanging support
Clients use Bright Frames when they want a display that looks ordered and stays that way. Sipho Maseko and the team bring framing knowledge, practical installation experience and an eye for proportion, which helps when the work includes different sizes, mixed media or a tricky wall. Naledi Khumalo and Pieter van Wyk often guide the layout choices, while Ayesha Patel helps with presentation details that affect the final result.
Whether the job is a family photo wall in Parkhurst, a gallery opening in Rosebank, or a corporate collection in Pretoria, we aim for clean spacing, secure fixing and a finish that suits the room. We do the measuring, the alignment and the careful adjustment, so the display feels calm and well placed rather than rushed or uneven. It is the sort of detail that people notice even if they cannot say exactly why it works.
Key facts
| Service area | Parkhurst, Johannesburg, Pretoria, Midrand, Sandton, Rosebank, Cape Town and Durban |
|---|---|
| Wall types | Plaster, brick, concrete and drywall |
| Typical spacing | 50 mm to 150 mm between frames, depending on layout and size |
| Common uses | Homes, galleries, offices, foyers, corridors and retail spaces |
| Turnaround | Small jobs within a few working days, larger projects by arrangement |
| Maintenance interval | Visual checks every 3 to 6 months, hardware review every 6 to 12 months |
